The number of faults disrupting production for hours and costing heavily to organizations are caused because of not using adequate corrosion protection over pipes and cables, wire harness protection, waterproof protection, and end sealing protection. Using conventional tape to seal the electrical cables and joints does not provide dependable protection against harsh environments and complex locations in production units because the environment is found to have considerably high levels of gases and moisture. At some locations, cables and pipes come into direct contact with water also. So, to minimize the electrical faults and maintenance period, you need the apply the best corrosion protection sleeve, wire harness protection sleeve, waterproof cable jointing kits, end sealing kit for extensible RMU / GIS Bushing, etc.
Wire Harness Protection Sleeves:
UV stabilized wire harness protection sleeves with an adhesive layer designed at a 4:1 shrink ratio provide environmental sealing and corrosion protection to automotive splices. Hot melt adhesive of heat-shrinkable dual wall tubes stops the entry of moisture content into wire sheaths and in between the wires. The heat-shrink harness protection sleeves are inserted over the cable splices; on heating, the tube shrinks and the adhesive coating melts squeezing around the wire crimps or welded connectors. Good flexibility provides excellent mechanical protection also. Wire harness protection sleeves allow for easy installations with bundles of cables and hoses having a large number of connectors.
Sealing Kit for Extensible RMU / GIS Bushing:
Made of specially-formulated cross-linked non-tracking Polyolefin material Elastomeric sealing kit for extensible RMU / GIS bushing helps to neutralize the absorption of water and gasses by keeping the cable splices tightly intact. End Sealing Kit for RMU extensible / GIS bushing, tested for water absorption 0.2 % (max.) and 1250C shrink temperature, seals and insulates the ends of bushings. End sealing kits are removed from bushings for making new connections. The screened end cap is a necessary protection solution to provide long-lasting electrical insulation and mechanical protection over the seal bushings, junctions, and feed devices.
Corrosion Protection Sleeve:
Corrosion protection sleeves are designed to provide dependable corrosion protection to hot water transmission pipelines. In addition to excellent resistance against abrasion and chemical attack, these sleeves provide supportive thermal insulation also. The tubular sleeves prevent corrosion accumulation at welded pipe joints. The flexible and mechanically strong sleeves are compatible with all types of pipeline jackets and coatings.
Waterproof Cable Jointing Kits:
Heat shrinkable waterproof cable jointing kit is being offered as a lightweight, environmentally sealed compact system to splice dielectric extruded shielded cables. The kit contains moulded parts, heat shrinkable tubing, mastics, and other supporting accessories to complete a joint. All the kit components are heat shrinkable; so, these adapt to required shape and size on being heated. The key contents of the kit, supplied in an expanded state, are tinned copper braid, stress control mastic, worm clips, cleaning solvent pouches, anti-tracking/lug sealing tubes, PVC insulation tape, stress grading mastic, etc.
Securing the electrical installations exposed to hard environmental and production conditions in industrial and commercial setups is the major common concern of engineers and consultants. Leading manufacturers of heat shrink insulation and corrosion tubes now offer waterproof cable jointing kits with complete instructions to facilitate easy electrical insulation, good chemical resistance, and tough corrosion protection.