The heat-shrink power cable accessories are drawing wide scale attention of engineers, industrial consultants, contractors, technicians and others because of being a cost-effective solution to reduce accidents. Though the technology exists since decades but the increasing incidents of accidents because of short circuit, improper electrical insulation, current leakage, inaccurate connections, exposure of live-current cable ends, etc are making heat shrink cable joints, heat shrink tubes, heat shrink moulded shapes, and other accessories in high demand.
All posts by admin
Heat-Shrink Tubes for Automotive Industry: The Best-Fit Solutions by Gala Thermo
Polyolefin heat shrink tubes are finding increasing applications in the automotive industry as the quality standards getting tougher and the automobile manufacturers are competing to deliver the best reliable and performing vehicles. The presence of leading automobile manufacturers in the global marketplace also makes it a must to use the best technology to minimize the possibility of recall.
The Challenge: All the top automobile manufacturers usually face a common problem: The repeatedly occurring electrochemical reaction with metallic connections triggered by friction welding. The result is corrosion that often leads to operational system failures; even, sometimes an expensive recall. The Approach: Various innovative solutions were tested but the use of heat shrink cable accessories including heat shrink sleeves and heat shrink molded shapes to protect automobile cables and connections against several hazards including mechanical, chemical, and environmental emerged as the most effective and feasible solution.
Continue reading Heat-Shrink Tubes for Automotive Industry: The Best-Fit Solutions by Gala Thermo
Additives: A Key Parameter to Buy Heat Shrink Cable Joints, Tubes, etc.
When heat shrink technology was introduced initially, the common applications were for electrical insulation of standard cables, joints, and terminations but with the passage of time, industrial needs went beyond the conventional applications to make the products better suitable for the areas having-
- Heavy pollution
- High UV exposure
- Radioactive elements
- Salt fog
- Inflammable entities
- Oil leakage
More Options to Apply Heat Shrink Technology than Ever Before
Continue reading Additives: A Key Parameter to Buy Heat Shrink Cable Joints, Tubes, etc.
Transitioning To Heat Shrink Electrical Accessories from Conventional Insulating Practices
Are you still using conventional practice of insulating cables and other accessories to safeguard electrical installations against environmental impacts, usage errors, and risks? If you are experiencing increasing downtime because of frequent electrical faults causing financial losses in parallel, it is time to transit from conventional insulating practices to the advanced insulation practices. Yes, I am talking about heat shrink electrical accessories available for a range of applications to insulate power cables joints, cable terminations, switchgears, busbars, overhead lines, wooden poles etc.
Transitioning To Heat Shrink Electrical Accessories Is Easy
The ease of adoption, cost-effectiveness, required skills, and feasibility are the top concerns whenever you adopt a new technology. The leading manufacturers of heat shrink power cable accessories and other application-ready heat shrink products offer an ever-expanding product-line the suit your particular insulating needs. Each category of heat shrink insulation accessories has a range of low-cost products that do not need extra funds. In long run, you get the satisfactory ROI for spending heat shrink accessories. Adoption of heat shrink technology is easy because it does not need specific training. All the products come with usual manual to guide your existing electrical technicians.
Is It Reliable To Use Heat Shrink Accessories For Electrical Insulation?
Heat shrink tubing market is growing at a CAGR of 5.7% and it is expected to reach USD 2,730.98 million by 2028. The universal use of heat shrink insulation products is in challenging locations; may it be at indoor, outdoor , underground, under water, and ducts. If remote locations, design constraints, and harsh environments are your concerns, using heat shrink insulating accessories is the best solution. Made of cross-linked polyolefin, heat shrink electrical insulation products are – chemical resistant, UV resistant, waterproof, abrasion resistant, and flame retardant. Rust protection advantage is an extra reason that favors for using heat shrink products.
Heat Shrink Insulation Accessories Vs Conventional Insulating Tape
Electrical tapes generally made of vinyl, rubber, mastic, etc. is easier to apply. Heat shrink sleeves and other accessories come in predetermined shrink ratios that assure a more precise fit even to congested areas. With adhesive-lined heat shrink tubes, you can form waterproof seals. Heat shrink tubing creates a strong protection layer against the possibilities of physical damage.
The main limitation of electrical tape is its limited durability because over the period, it loses its adhesiveness to insulate the electrical cable or other components of electrical installation. When exposed to heat, conventional insulating tape starts deteriorating and harsh environmental factors accelerate deterioration process. Electrical tapes do not perform well in applications having exposure to chemicals and abrasion.
Five Tips to Take the First Step towards Heat Shrink Technology Adoption
With increasing adoption rate of heat shrink technology for insulating electrical accessories not only in industrial installations but in products also, the top manufacturers of heat shrink tubes, cable splicing kit, heat shrink tape, heat shrink couplers, protection shrouds, cable end sealing Caps, etc. provide application-ready insulating solutions. The following five tips will help you switch to heat shrink electrical accessories from conventional insulating tape-
- Determine the accurate size/rating of cables and other accessories
- Decide the spots in electrical installation that you want to insulate with heat shrink accessories
- Deal with the top manufacturers of heat shrink electrical insulation accessories
- Explore the entire product-line in a particular segment to select the best suitable accessories
- Go through user manual to leverage the benefits of using heat shrink technology
An Update About Innovative Insulating Solutions by Gala
Adopting the best dependable insulation measures is the top concern of industrial engineers, consultants, electrical engineers, contractors, and others. The building owners also want to have robust protection against electrical faults. The search for innovative but convenient to use electrical insulation solutions never ends but as of now, Gala Thermo offers the best insulating solutions to secure your electrical installations.
About Gala Thermo
Established in the year 1979, Gala Thermo Shrink Pvt. Ltd. is a member of Gala group of companies; today, it is top performing manufacturer, supplier, and exporter of cable management products with proven specialization in manufacturing a range of Heat Shrinkable products. Research and development activities keep going on consistently to deliver 100 percent satisfaction to end users with a zero defect level. The heat shrink products quality policy is accredited ISO 9001:2015, ISO 14001: 2015 and ISO 45001: 2018.
Ever Expanding Range of Rohs Compliant Heat Shrink Insulation Products
The leading heat shrink electrical insulating products manufacturers keep expanding the range of custom-to-need innovative insulating solutions. Users get several options to address their diverse demands of insulating products by exploring categories of heat shrink tubes, moulded shapes, and power cable accessories. All the products offered by Gala are tested at its own ‘High Voltage Test Lab’ and are IP 68, IEC, ASTM, Ul224 AND MIL-SPEC, and RoHS compliant.
The more in use insulating heat shrink accessories that are drawing wide scale attention of electrical professionals are-
- Heat Shrink Sleeve: Cable joints, cable terminations
- Shrinkable Tubes: Low voltage tubes, red insulation tubes, thin wall tubes, non-tracking tube, etc.
- Heat-shrink Moulded Shapes: Cable end caps, low voltage breakout, anti-tracking breakout, right angle /straight, rain sheds, etc.
- Switchgear Insulation Products: Busbar sleeves, bus bar end caps, high voltage insulation sheets, bus bar insulating shrouds, etc.
- Busbar Sleeve for 66 KV: Busbar sleeve up to 66 kv
- Cable Repair Products: Wrap around sleeve, repair sleeve, etc.
What Is New That You May Not Know About Heat Shrink Cable Accessories
Heat shrinkable joints and terminations offered by Gala Thermo are available under the name of CABLINK. To find new additions to this category, explore- GXLT/GPLT- Series, GXSS – 1236 – Series, GXS/1236kv – Series, GTJ/2436 kv – Series, GPS/2436 – Series, GPS/1112 – Series, etc.
Heat shrinkable tubes also known as heat shrink sleeves are available in various categories designed to suit the particular insulation applications. To find the new additions to this category, explore the product line of thin wall tubes, medium/heavy wall tubes, red insulation tubes, non-tracking tubes, busbar tubes, stress control tubes, double layer tubes, etc.
New products are also added to heat shrink moulded shapes. To find the new additions to this category, explore the product line of cable end caps, low voltage breakout, anti-tracking breakout, semi conductive cable breakout, rain sheds, right angle boot/straight boot, anode cap, heat shrink boot, etc.
As the expansion of product line has become an organizational culture at Gala Thermo, some new products are recently added to cable repair accessories also. To find the new additions to this category, explore the product line of sleeves for cable repair and wrap around.
Now Insulcore low voltage cable breakouts, available with ‘Technical Qualification Report No.: QR 1012’ provide a strong and dependable insulating seal to the crutch of 2, 3, 4, 5, 6 and 7 core PVC, XLPE Rubber and PILC cables up to 3.3 KV voltage.
Endnote: Heat shrink electrical insulation accessories manufactured, supplied, and exported by Gala Thermo are made of co-extruded polyolefin with options to choose shrink ratio of 3:1 or 4:1.
Heat Shrink Power Cable Joints- A New Way to Secure Electrical Installation
Cable jointing is an indispensable exercise for electrical engineers. High expectations are placed on this skill because a cable joint protects cables against dust, moisture ingress, and penetration impact of foreign objects. A range of cable jointing systems and termination kits is available to facilitate engineers to distribute and supply electricity securely at medium/high voltages in transformer terminals, switchgear, air-insulated cable boxes, poles, etc. The emergence of heat shrink technology and time-tested beneficial results strengthen the confidence of end users to use this technology for better security measures to protect their electrical installations. The increasing use of heat-shrink cable joints, heat shrink cable sleeves, and other accessories is the result of expanding range of the product line in each category.
Emergence of Heat Shrink Cable Joints as the Robust Insulation Measure
Cable joints play a key role in the performance of electrical installations and electronic systems. These are used to connect power cables ensuring the continuity of electric current. Different types of heat shrink cable joints are used in industrial and large commercial electrical installations; the selection depends upon the intended application and on-site condition. Similarly, heat shrinkable terminations are made available by the leading manufacturers of heat shrink electrical insulation accessories to facilitate engineers for terminating the power cables securely. Heat shrink accessories shrink to their original size when exposed to heat with an electric or gas heat gun; the phenomenon simplifies the power cable insulation task for engineers. https://www.youtube.com/watch?v=2h41GJ_jH20
Types of Heat Shrink Cable Joints for Diverse Needs
- GXLT/GPLT Cable Joints: Suitable for 1, 2, 3, 3 & 4 Core PVC / XLPE/ PILC cables upto3.3kv
- GXS/1236kv Cable Joints: Suitable for 3 Core XLPE/PVC insulated cables for upto 36kv with black Streess Control Sleeve
- GXSS 1236 Cable Joints: Suitable for single core XLPE/EPR/PVC insulated cables for upto 36kv
- GPS/1112 Cable Joints: Suitable for 11kv 3 core PILC cables upto 16 to 630 sq.mm. cable size
- GPS/2436 Cable Joints: Suitable for upto 33kv 3 core screened PILC cables (24 kv & 36 kv Series) upto 25 to 500 sq.mm. cable size
- GTJ/1112kv Cable Joints: Suitable for 3 Core XLPE/PILC Cables upto 12kV upto 3×16-35 to 3×630 sq.mm. cable size
- GTJ/2436 kv Cable Joints: Suitable for 3 Core XLPE/PILC Cables upto 36Kv upto 25 to 3×63 500 sq.mm. cable size
Heat shrink power cable joints are made available in a kit form that contains all the installation aids and accessories required to complete a perfect heat shrink joint.
Selection of Proper Power Cable Joints
Switching to any other methodology from a traditional methodology is done with expectations of getting better results; the same is the case when people start using heat shrink cable joints leaving the conventional practice of using PVC tape. The performance of cable joints depends upon the selection of the right cable joints based on-
- Cable type (structure, material, insulation)
- Cable size (thickness)
- Cable conductors
- Power rating (voltage)
- Required strength and mechanical protection
- On site environmental conditions
The leading cable joint manufacturers and suppliers offer a broad spectrum of heat shrinkable joint products for secure splicing of extruded dielectric shielded power cables in straight and transition styles.
Pro-tip
Heat shrink cable joints need less space and add less weight to cable installations if compared to traditional resin cable joints.
All That You May Not Know About Heat Shrink Power Cable Accessories
The global demand for heat shrink accessories is increasing fast because these are being trusted by more electrical engineers and industrial consultants for offering a convenient and dependable way to protect different elements of an electrical power system in harsh environments. Heat shrink power cable accessories drive-in reliable sensing solutions and highly engineered connectivity to implement security advancements in transportation, construction, shipping, oil & gas processing, manufacturing, healthcare, consumer products, energy generation, and other industries.
Heat Shrink Power Cable Accessories- A Dependable Electrical Insulation Solution
Power cable heat shrink accessories are being used widely to facilitate joints and terminations as well as to fulfilling the special requirement in electrical installations such as sealing of cable end through end cap, breakouts for cores separation, bus bar taping, bus bar sleeving, rain sheds to increase creepage distance, medium wall tubing for cable joint insulation, right angle and straight boot to insulate switchgear and transformer terminals, cable repair sleeves to ensure wrapping of the repaired cable properly, etc. A wide range of heat shrink power cable accessories and cable sleeves is available today; the selection of the best heat shrink power cable accessories or heat shrink sleeves depends upon site conditions, voltage applications, cable types, operating parameters, etc.
When You Need Heat Shrink Accessories The Most
The heat shrink power cable accessories effectively meet the special insulation requirements like-
- Heavy polluted areas
- High UV environment
- Salt fog environment
- Oil barrier property
- Flame retardant property
- Fire resistance
- System integrity enhancement
- Functionality during the loss of coolant accident (LOCA) condition
- Gamma radiation resistance
Heat Shrink Products Are Made Of Polyolefin Material
The key benefit of heat shrink products is because of the crosslinking effect of polyolefin material. The polyolefin material performs not only one-way conventional multi-shape memory effects but it is good to have two-way reversible shape memory effect (RSME) also. The shape memory effect is a process when a material regains its original size and shape when heated at a certain temperature for a certain period. The robust quality standards considered by the major players are IEC 60684-3-247 standard, IP 68 (Ingress Protection), RoHS Compliance, CE Certificate Class 3, ERDA Test Certificate for Bus bar tube, MSEDCL Approval upto 11 kV, etc.
The Most Used Power Cable Accessories Categories
The leading manufacturers and suppliers are continuously extending their product lines in different categories to offer their clients an application-fit insulation solution. The top power cable accessories manufacturers offer a range of heat shrink application-ready products in the following categories-
- Heat Shrinkable Joints & Terminations
- Insulation Enhancement Product
- Screened Separable Connectors
- Heat Shrinkable Moulded Shapes
- Heat Shrink Tubes / Heat Shrink Sleeves
- Switchgear Insulation Products
- Cable Sealing & Repair Products
- Overhead Line Cover (Insulcover)
- Overhead Line Tube (Insulcover)
- Pipeline / Corrosion / Cathodic Protection Products
- Pole Protection Products
Plenty Of Choices To Buy Heat Shrink Tubes & Cable Accessories
The top manufacturers of heat shrink products allow their customers to have custom-to-application heat shrink sleeves and other accessories. You can explore the categories based on preferred material quality and color. The commonly available colors for the distinction of cables are blue, brown, yellow, green, orange, red, white, etc. You can opt for with adhesive and without adhesive accessories as per requirements. The material quality choices that you have include crosslinked polyolefin, crosslinked co-extruded adhesive-lined polyolefin, crosslinked adhesive-lined polyolefin, modified polyolefin, and others.
Pro-Tip
Heat shrink power cable accessories are being used successfully for more than 50 years to better secure low, medium, and high voltage electrical installations in harsh environments. The verified significant reduction in breakdowns, accidents, and maintenance costs is driving industries to embracing heat shrink technology with a valid justification.
The Top Manufacturer, Supplier & Exporter of Heat Shrink Products
Heat shrink products are getting new applications in vivid commercial establishments; may it be a manufacturing unit, offshore refinery, warehouse, or shopping mall. Until a couple of years back, the importance of using heat shrink products was lesser known but today more and more electrical engineers and consultants recommend the use of heat shrink electrical insulation and corrosion protection accessories. When first-time users explore the options to buy heat shrink tubes and other accessories, Gala Thermo emerges as the top manufacturer, supplier & exporter of heat shrink products.
An OHSAS Certified Gala Thermo- The Best Choice to Buy Heat Shrink Accessories
An OHSAS Certified Company, Gala Thermo Shrink Pvt. Ltd., supplies heat shrink cable management products in the global marketplace with a competitive edge. With experience and in-depth knowledge nurtured since 1979, Gala Thermo manufactures a complete line of application-ready heat shrink products including Heat shrink busbar tubes, heat shrink tubes, heat shrinkable terminations, heat shrinkable joints, busbar insulation shrouds, low voltage cable breakouts, high voltage insulating tape, and many more. The ongoing research and development activities guide the company to innovate new solutions to make the electrical insulation of large installations robust.
Remarkable Achievements That Prove Excellence in Heat Shrink Products Manufacturing
During the journey, the company has set many milestones for the industry to produce export-quality heat shrink power cable accessories. The quality control system is accredited to ISO 9001:2015, ISO 14001: 2015, and ISO 45001: 2018. The company owns full fledge laboratory to test the products as per international quality standards. The certifications like ROHS, UL, and OHSAS 18001 prove that Gala Thermo has a zero-tolerance policy to maintain quality standards and the trust of its global clients. The remarkable achievements in addition to ISO certification that prove its excellence in manufacturing, supplying, and export of heat shrink products include-
- Erda Test Certificate for Bus Bar Tubes
- OHSAS-18001:2007 Certificate
- CRPI certification
- Quality Brand Certificate
- National Education and Human Resource Development Organization Certificate
Dedicated Supply Chain for Domestic and Offshore Supply of Heat Shrink Accessories
On the time hassle-free door-step supply with consistency is the major concern of bulk users of heat shrink electrical insulation products. Gala Thermo has an ever-expanding dedicated supply chain to manage the challenges successfully in domestic and offshore supply. The ever-changing required product specification and parameters come up as the biggest challenge; here comes the role of R&D labs of Gala Thermo that help the company to produce the products that the end users need. Its impressive existence in more than 100 countries including North & South America, Europe, Scandinavia, Africa, Middle East, Australia, and the Far East makes Gala Thermo a trustworthy manufacturer and exporter of heat shrink products.
Ever Expanding Product Line of Heat Shrink Electrical Insulation Products
Buyers’ requirements keep on changing because of new conditions in ongoing electrical installations. Besides prompt service, excellent quality, competitive prices, quick deliveries, customer-friendly approach, and flexibility in deals, modern-age buyers prefer to buy ready-to-use products. Therefore, Gala Thermo emphasizes expanding its product line in each category; for example, you can choose the most appropriate heat shrink sleeve out of thin wall tubes, medium/heavy wall tubes, red insulation tubes, non tracking tubes, stress control tubes, double layer tubes, etc.
Wrapping-Up
Gala Thermo offers online assistance also to its clients to help them buy the right product for a particular objective. The emergence of Gala Thermo is a continuous journey; the company is committed to continually expanding its heat shrink products manufacturing capabilities by incorporating the latest technologies.
How The Heat Shrink Tubes Secure Power Cables To Increase Your Profit
The increasing numbers of large business setups are turning to embrace heat shrink tube electrical insulation methodology to save on hefty maintenance costs plus the loss that occurs because of frequent shutdowns. The secured power cables contribute at large to the profitability of mid to large business establishments secretly but this contribution remained neglected until the fierce competition forced businesses to address every issue that can impact their growth rate. Among the available options, using Polyolefin heat shrink tubed and accessories to secure electrical cables and installations ranks at the top because of its several unique benefits.
Effectiveness of Heat Shrink Sleeves to Improve Performance of Industrial Electrical Installation
Heat shrink sleeves are produced to protect and secure different cables, connectors, and splicing in a dependable way as well as to provide an extra layer of insulation. If regulatory provisions are followed in heat
shrink sleeves usage, the heat shrink technology gives long-term effective protection against behavioral impacts, environmental impacts, on-site conditional impacts, and aging impacts. The commonly experienced and shared experiences of improved performance and profit by business owners, industrial consultants, and electrical engineers are-
- Effective waterproof seal against marine elements like water, oil, salt, sunlight, and acids
- More durable insulation layer and long-lasting seal than the tape
- Protection against environmental abrasion and corrosion
- Protection of sensitive points in electrical installations against vulnerability
- Reduced contamination
A Range of Heat Shrink Sleeves for the Entire Electrical Installation
The adoption rate for heat shrink sleeves is increasing with each passing year as per the market predictions. The application of heat shrink tubes or sleeves is not limited just to securing power cables against conditional and environmencvtal impacts but leading heat shrink sleeves manufacturers offer custom-to-application heat shrink tubes to secure entire electrical installation; for example-
- Non-tracking heat shrink tubes
- Heat shrink busbar tubes
- Red insulation heat shrink tubes
- Double-layer heat shrink tube
- Stress control heat shrink tube
The Major Causes of Electrical Faults That Can Be Avoided By Using Heat Shrink Tubes
There is a long list of reasons for electrical faults that forces industries to stop production until the power supply is restored. Not all but certainly major ones can be avoided by using heat shrink sleeves under professional directions. Some of the major reasons for electrical faults that cause heavy loss to industries but that can be avoided by using heat shrink tubes are –
- Electrochemical treeing in underground cables
- Water ingress
- Rodent attack
- UV exposure
- Degradation of the cable sheath
- Thermal breakdown
- Lightning strike
- Mechanical failure
Secure Your Power Cables To Increase Your Profit
Yes, it is true. The numbers of frequently occurring heavy losses, the culprit of eating your profit, can be reduced to the minimum level by using quality approved heat shrink sleeves are-
- Shocks to individuals
- Loss of equipment because of accidental heavy current
- Low performance of machinery because of increased maintenance
- Disturbed interconnected active circuits
- Production stoppage because of the uncertainty of power supply quality
- Waste of material left in mid of production process because of electrical fault
- Increased size of workforce and requirement of more funds
Why Choose Gala-Thermo to Embrace Heat Shrink Technology
Adoption rate of heat shrink technology in India is also increasing fast like in other countries because the end users are experiencing the benefits as are claimed by the heat shrink electrical accessories manufacturers. Though the heat shrink technology was invented and introduced for commercial applications decades back, yet, high numbers of people are hesitant to embrace heat shrink electrical and corrosion insulation accessories because of having little awareness about the cost saving, performance improving, and life-saving benefits. Gala-Thermo one of the top manufacturer, exporter, supplier of heat shrink electrical insulation accessories is on a continuous journey to spread awareness about the next generation measures to secure electrical and mechanical installations.
Gala-Thermo- A Heat Shrink Accessories Manufacturer with Difference
The journey of Gala Thermo started in 1979 with entry in to cable management business by manufacturing world-class heat shrinkable range of heat shrink cable joints, cable end sealing caps, cable terminations, spreader caps, heat shrink tubes, heat shrink end caps, cable accessories, cable splicing kit, etc. With passage of time, Gala-Thermo became the pioneer manufacturer of heat shrink products by expanding its product line with emphasize on providing application-ready heat shrink solutions to engineers, contractors, technicians, industrial consultants, small unit owners, and others. Accreditation to ISO 9001:2015, ISO 14001: 2015 and ISO 45001: 2018 certifies the quality excellence of Gala-Thermo heat shrink accessories; and, the users’ experience makes it different.
Certified Quality Assurance for Dependable Supply & Export
Over the years, Gala-Thermo has developed a dependable supply chain to supply the ordered heat shrink accessories on time with consistency. The company has channel partners pan India to address customers’ issue promptly. The company has a dedicated team of process specialists and agents to manage seamless export of heat shrink insulation products to more than 100 countries. The continually strengthening presence of Gala-Thermo in more numbers of countries tells its success stories with remarkable achievements. The certifications that foster international image of Gala-Thermo include SEB Approval, PGCIL Approval, MSEDCL Approval, ERDA Test Certificate, CE Certificate Class 1/2/3, and others.
The Application-Ready Heat Shrink Solutions
Gala-Thermo has the world-class R&D facilities. The customers’ feedback and product reviews become the guiding force to drive the company for unabated improvement. Today, one of the top manufacturers, suppliers, and exporter of heat shrink products in India, Gala-Thermo offers an ever expanding range of heat shrink accessories. The selection of heat shrink products can be made based on- environment, possible hazard type, usage challenges, cable rating, electrical installation type, safety regulations, etc. Following the client-centric approach, Gala-Thermo offers online assistance also to help its clients buy right product to safeguard and insulate busbars, cable-ends, cable-joints, structural parts, etc.
The New Heat Shrink Products Recently Added To Product-Line
Innovation to improve quality and product range has become an organizational culture at Gala-Thermo. The new additions to product portfolio that will make you interested in heat shrink electrical accessories are wrap around sleeve, overhead line cover, tamper proof end seal, anode caps, vinyl pole caps, post tensioning duct joint, mastic tape, etc. If you have any special concern for electrical and corrosion insulation to protect the industrial and commercial installations, get in touch with support team to get the best fit solution.
Pro-Tip
Heat shrink sleeves have been proved remarkably effective to safeguard underground pipes against corrosion. The heat shrink sleeves provide added strength to pipe line ensuring that the heavy pressure doesn’t cause damage to the pipeline.