Any damage to power cables can result in significant safety hazards and loss of power. Cable damage may happen because of many reasons like exposure to moisture, fungus development, extreme weathering, and environmental factors, making it necessary to provide proper protection to cables. Gala Thermo the leading manufacturer, exporter, and supplier of premium quality heat shrink moulded shapes offers application-ready cable end sealing caps also called heat shrink cable end caps being marketed under the brand name Insulcap. Wouldn’t you like to know more about the low-cost heat shrink cable end sealing caps and explore the possibilities of protecting your cable ends and secure your electrical installations against faults, maintenance, and accidents?
Insulcap- Heat Shrink Cable End Caps – Cable End Sealing Caps: Made from high quality cross-linked polyolefin material, Insulcap heat shrink cable end caps can be used to secure a range of power cable including XLPE, PVC, PILC OR rubber sheathed cable. These are design with a hot melt adhesive lining that provides permanent seal on irregular parts of cable sheaths. Gala Thermo heat shrink cable end caps are also designed to operate at a wide temperature range between -40°C and +110°C, making it perfect for use in extreme cold or hot environments. Insulcap cable end caps are resistant to fungus and UV light, thus, these prevent the cables from deteriorating and extend the lifespan of the cables. Insulcap heat shrink cable end sealing caps are designed to provide quick and easy installation, saving time and effort. When heated, heat shrink moulded shapes shrink evenly and consistently providing reliable protection that you look to get the peak performance of your electrical installations. The key features of Gala Thermo cable end sealing caps are-
- Operating temperature: -40 up to +110°C.
- Shrink temperature: from 125 °C.
- Tensile strength: 12 MPA
- Elongation at rupture: Minimum 350%.
- Resistance to heat shock: No cracking or flowing at 250oC for 30 Min.
- Water absorption: 0.2% of weight
- Dielectric strength: minimum 12kV/mm.
- Longitudinal shrink: not more than 25%
- Resistant to UV radiation
Application-Ready Heat Shrink Cable End Sealing Caps: When you rely on Gala Thermo to buy heat shrink cable end caps and other heat shrink moulded shapes, you get maximum variants to fit the particular on-site requirements. One of top manufacturers of heat shrink power cable accessories in India, Gala Thermo offers customization facility also enabling the users have heat shrink cable end caps with particular logo and color. Valved End caps (v) are also available for pressurized application for telecom cables. To secure the ends of high voltage power cables, you can explore Special Relief valved End Caps (RV) category. For sealing live cables, you may rely on Live End Cap Kits. Conductive end caps are also available with conductive mastic. Gala Thermo heat shrink cable end caps are made available under different code nos. assigned to particular internal diameter when supplied and diameter after free recovery; therefore, accurate cable specifications become must to buy the best cable end sealing caps.
Gala Thermo Shrink Pvt. Ltd. is a member of Gala group of companies, established in the year 1979. Maintaining ultimate customer satisfaction and quality standards to a zero defect level are the core objectives of the management. To get quality-assured heat shrink power cable accessories and heat shrink moulded shapes, call +91 7977750051/52/56 or mail info@galathermo.com , support@galathermo.com.