Can you expect an electrical installation performing for a long without protection against abrasion, impacts, corrosion, and sharp cutting edges? The robust protection against chemicals, dust, water, and intrusive contaminants is a must-have to minimize faults in electrical installations. If electrical installation is complex in nature contributing to performance and productivity, the importance of having the best insulation measures becomes more. A fine finished appearance and smoother texture with easy-to-handle cable bundles increase the aesthetic and professional worth of working places. Heat shrink sleeves address all these concerns in addition to others.
Increasing Acceptance of Heat Shrink Sleeves and Accessories
According to a report by marketsandmarkets.com, the heat-shrink sleeves market is projected to reach USD 2.3 billion by 2024. On the basis of voltage, the heat-shrink tubes market can be segmented into three categories – low voltage, medium voltage, and high voltage. The low voltage heat shrink insulation sleeves segment is estimated to share the largest market share. The heat-shrink tubes is increasingly becoming an essential protection component for electricity distribution in 1–1.1 kV range.
The manufacturing sectors like utilities, automotive, aerospace, military, food & beverage, processing, chemical, etc are the top consumers of heat shrink protection sleeves. Polyolefin segment is projected to be at top for sharing heat-shrink tubes market. Now, it is your turn to safeguard your electrical connections against all the possible odds with heat shrink sleeves, bus-bar tubes, cable joints, cable terminations, cable end caps, shrinkable tape and other accessories.
ROI Trust Factors For Using Heat Shrink Tubes & Accessories:
Although heat shrink tubes are trusted to offer sturdy protection cover for cables and wires against the exposure to environmental effects, these also provide excellent protection against undue strains or stretching pressures because of insufficient length or space. Significant reduction in loss of energy also makes the use of heat shrink power cable accessories a trustworthy choice justified with its ROI.
In addition to preventing slippage and tripping hazards, heat shrink cable sleeves make the repairs long-term effective. Natural forces like moisture, dirt and chemicals cause corrosion and fungus that harm the life cable wires and insulating metallic armor; the issue is serious but it is often ignored. Heat shrinkable tubing made of polyolefin has some excellent ROI assuring properties to become a choice of engineers and consultants for safe and long-lasting electrical installations-
- 400C to +1100C operating temperature
- RoHS Compliance
- 15KV/availability Dielectric strength
- Meets ingress protection 68 parameters
- Quality specifications as per IEC, ASTM, AND MIL-SPEC
- Tensile strength 12 N/mm2
- Dielectric strength 12 KV/mm
The process of using heat shrink tubes is simpler than the common thought line. The long-term benefits of safeguarding electrical installations with heat shrink accessories are beyond the benefits aligned to protection, lifetime, and maintenance. The properly insulated electrical installations strengthen the confidence of workers. The neat and clean systemized installation strengthens the brand image. The extra precaution against fire hazards often help the building owners get insurance cover at extra discount. Just think about frequent breakdowns and the occurred loss not only in terms of production cost but also in terms of late delivery, revenue, bad reputation, supply chain disturbance, high payout to maintenance department etc.
The heat shrink technology is being embraced globally trusting its benefits; a small investment to embrace the next-generation must have technology may help you perform and grow faster on a low risk roadmap.