Cable Repair Products
Heat Shrink Wrap Around Sleeve - INSULSLEEVE
Heat Shrink Wrap Around Sleeve is a cross linked polyolefin 'tube' which is folded around the cable/pipe, zipped up with a stainless steel channel and then heat shrunk.It is also cold as (Cable Repair Sleeve).
Shut down of system not required for repair.
- Shut down of system not required for repair.
- Hotmelt adhesive provides complete environmental sealing and insulation.
- High resistance to UV rays, chemicals, corrosion, fungus, etc.
- Temperature sensitive paint changes colour when heat shrinking process is complete.
- Maximum length available upto 1500 mm.
- Meets IP 68 (Ingress Protection)
Recommended Thickness :
All dimensions in mm
- Part number /size
- Diameter (D)
- Thickness (± 20 %)
- Application
- Supplied
- Recovered
- (recovered)
- Cable Range
- GWS-55/8
- 55
- 8
- 2.7
- 42-8
- GWS-76/18
- 76
- 18
- 2.7
- 62-22
- GWS-105/28
- 105
- 28
- 2.7
- 92-30
- GWS-140/35
- 140
- 35
- 2.7
- 122-38
- GWS-190/46
- 190
- 46
- 2.7
- 160-50
- GWS-240/50
- 240
- 50
- 2.7
- 200-55
Length as per requirement (maximum 1500 mm)
-
For Cable Repairs
-
For the protection of Cable joint
-
For corrosion protection of Oil, Water & Gas pipeline
TECHNICAL SPECIFICATION
- PROPERTIES
- VALUE
- STANDARD
- Physical
- Tensile Strength
- 17 N/mm2 (MPA)(min)
- ASTM D638
- Ultimate Elongation
- 300% (Min.)
- ASTM D638
- Longitudinal Change
- -10% (max.)
- ASTM D2671
- Water Absorption
- 0.2 % (max.)
- ASTM D570
- ESCR 48 hrs. for 50oC
- No Crack
- ASTM D570
- Torchability
- No split
- Te 201 AOL
- Thermal
- Accelerated Ageing
- (120oC for 500 Hrs)
- ASTM D2671
- Tensile Strength
- 15 N/mm2 (Mpa) (min.)
- ASTM D 638
- Ultimate Elongation
- 220 % (Min.)
- ASTM D 638
- Temperature indicating Paint
Conversation
150oC for 30 min
250oC for 5 min -
No Change
Colour Cahnge -
Visual
Visual
- Electrical
- Dielectric Strength
- 12 KV/mm. (Min.)
- ASTM D149
- Chemical
- Chemical resistance in 0.1 N sol.
of
Na2 , So4,Na2,Nacl2,H2so4
Tensile Strength
Elongation
15 N/mm2 (MPA) (min)
200 % (min)- ASTM D2671
ASTM D638
ASTM D638
Products
Heat Shrinkable Moulded Shapes
Heat Shrink Tubes / Heat Shrink Sleeves
- Advantages Of Heat shrink Tubing
- Thin Wall Tubes
- GDW : Dual Wall Tubing
- Medium/Heavy Wall Tubes-Commercial
- Heat Shrink Co-extruded Tubing Premium Quality
- Red Insulation Tubes
- Non Tracking Tubes
- Busbar Sleeves
- Stress Control Tube
- Integrated Stress Control Tube-GVOT Tube
- Heat Shrink Double Layer Tube-GDTL Tube
- High Shrink Ratio Heat Shrink Tube
Switchgear Insulation Products
- Barrier Board Sheet
- End Sealing Kit for Extensible RMU/GIS Bushing
- Heat Shrink Bus Bar Sleeve
- Bus Bar Insulating Shrouds
- Bus Bar Insulating Shrouds Polyolefin
- Bus Bar End Caps
- Thin wall tube wire marking
- Heat Shrink Tape (Bustape)
- Insulation for Circuit Breakers
- Busbar Sleeve for 66 kV
- Bushing Boot
- Non Shrinkable High Voltage Tape
- Heat Shrinkable Gland
