Wildlife Protection Products / Insulation Enhancement Products
Gala's Wildlife Protection Products / Insulation Enhancement Products such as Pre-moulded Protection Covers, Heat Shrinkable Tubes, Tapes, Sheets, etc. provide a long term, cost effective and easy to install retrofit solution to eliminate power outages caused by bird and animals. Electrical Distribution equipment with bare bus bars, conductors and connections is always at risk to having phases or phase to ground accidentally bridged.
Below are the products offered for Wildlife Protection Products / Insulation
Enhancement Products Industry
Wildlife and Asset Protection Products / Insulation Enhancement Products
Gala's Wildlife and Asset Protection Products / Insulation Enhancement Products such as Pre-moulded Protection Covers, Heat Shrinkable Tubes, Tapes, Sheets, etc. provide a long-term, cost-effective and easy-to-install retrofit solution to eliminate power outages caused by bird and animals.
High Voltage Wraparound Creepage Extenders
Gala's Creepage extenders have been used to prevent pollution flashover on insulators. The extenders are sealed to porcelain or glass insulators, driving the high leakage currents found in polluted areas around the edge of the extender's skirts. Each extender adds creepage to the insulator's existing creepage distance, reducing the electric stress. It also improves insulator or bushing performance by changing the overall shape to a stunned shed profile.
Bus/Bushing Connection Insulating Covers (Reusable)
Gala's Bus Connection Insulating covers are designed to protect energized conductors or busbar from flashovers due to contact from birds, squirrels and other wildlife. GPFIC parts are made from a UV stable, high performance material to ensure years of reliable service. A variety of different shapes and sizes are available to cover Busbar connections, Bus Standoff Insulators, Capacitors, Transformer Bushings, etc.
Overhead Line Cover - Polyolefin
Gala's Overhead Line Cover is a Medium Voltage Wrap Around Overhead Line Cover that provides retrofit insulation for overhead conductors to help prevent electrical outages caused by trees or wildlife coming into the contact with distribution lines. It is manufactured from high-quality UV resistant Polyolefin material. These covers provide a layer of electrical insulation for Phase-to-Phase and Phase-to-Ground protection from bird and animals.
Overhead Line Tube - Polyolefin
Gala's Overhead Line Tube is a Medium Voltage Line Cover that provides insulation for overhead conductors to help prevent electrical outages caused by trees or wildlife coming into the contact with distribution lines. It is manufactured from high-quality UV resistant Polyolefin material.
Overhead Line Cover - Silicone - Inter-locking
Gala's Silicon Interlocking Overhead Line Covers are made from high quality non-tracking silicon rubber that are designed for field installation over bare conductors. These covers provide a layer of electrical insulation for Phase-to-Phase and Phase-to-Ground protection from bird and animals. The GSIOC provides electrical insulation, UV resistance and tracking resistance. It provides Insulation up to 33 kV.
Overhead Line Cover - Silicone - Self-locking
Gala Silicon Overhead Line Covers are made from high-quality non-tracking silicon rubber that are designed for field installation over bare conductors. These covers provide a layer of electrical insulation for Phase-to-Phase and Phase-to-Ground protection from bird and animals. The GSOC provides electrical insulation, UV resistance and tracking resistance. Provides Insulation Enhancement up to 765 kV.
Heat Shrink Busbar Sleeves - up to 66kV
Gala's Heat Shrink Busbar Sleeve is heat shrinkable sleeve designed to insulate busbar systems up to 66KV and also to protect against accidental flash-over. It helps to reduces the air clearance. The sleeves are manufactured from high-quality cross-linked polyolefin material. Meets ANSI C37.20.2 standards for MV switchgear application up to 66 kV.
Heat Shrink Tape
Gala's Heat Shrink Tape is used for Insulation & protection of medium voltage busbar connections, where tubing cannot be used.
Bushing Boot
Bushing Boots are non-tracking elastomeric insulating boots that are used in conjunction with terminations. They fit over the bushings of Switchgear, insulating the area between the cable connector in either right-angled or straight bushing connections. They are designed to enhance the phase-to-phase and phase-to-earth insulation. The boots can be used up to 24 KV application & protect against flashover or surges induced in switchgear & transformer boxes.
Terminal Protector
Gala Silicon Overhead Line Covers are made from high-quality non-tracking silicon rubber that are designed for field installation over bare conductors. These covers provide a layer of electrical insulation for Phase-to-Phase and Phase-to-Ground protection from bird and animals. The GSOC provides electrical insulation, UV resistance and tracking resistance. Provides Insulation Enhancement up to 765 kV.
Heat Shrinkable Cable Joints
Gala is one of the leaders in designing and manufacturing Heat Shrink Joints for the most modern PVC/PILC/XLPE/EPR Low & Medium Voltage Power Cable up to 66kV Class.The design specification and quality of our Heat Shrink Cable accessories have been upheld by the most stringent national/International standards worldwide.
Heat Shrinkable Cable Terminations
Gala offers unsurpassed technical superiority for perfect Termination of most modern PVC/PILC/XLPE/EPR Low & Medium Voltage Power Cable up to 66kV Class. We provide CLASS 1 Terminations to Electrical Industries. Our Cable Terminations are made considerably tamper proof from environmental factors as the entire length between the wire termination point and contact is safely encapsulated with this protective product.
Screened Separable Connectors
Gala's Screened Separable Connectors are designed to connect single and three-core polymeric cables to Medium Voltage Switchgear, Transformers, RMU (Ring Main Units) and other equipment using bushings type “C” specified for 630A up to 36kV. It is made from highly modify EPDM rubber and it is protected by touch-proof outer conductive screened connected to earth.
Heat Shrink Pole Protection Sleeve
Gala's Heat Shrink Pole Protection Sleeve is manufactured from High quality Cross-linked Polyolefin material.It provides superior environmental sealing, rugged mechanical protection and high-performance electrical insulation. It is used on Wooden poles to prevent the decay of Poles at the critical ground-line area. It is the Best & Cost-effective Solution for long-term maintenance of Poles.
